MGA / MGB / GT Performance Parts

Brakes | Engine | Suspension | Urethane Bushings | Other

 

BRAKES

Description Price Part #
Kevlar pads or shoes $70 (shoes are exchange) #KBPSMGA/B
Carbon Kevlar pads $90  #CKPMGA/B
Full metallic pads or shoes (Race only - not recommended for street use) $110 #FMBPSMGA/B
Big front brake conversion - 29% pad area increase -includes rebuilt calipers (exchange) and new pads. (MGB only) $275 #BFBCMGB
Steelbraid brake hose set (3 pcs) $68.95 #SBBHMGA/B
Steelbraid clutch line $35.85 #SBCHMGA/B
Rebuilt MGB calipers (exchange - a core will need to be returned)$69.95/ea#MGBcaliperR

SUSPENSION

Description Price Part #
MGB front tube shock conversion - This is a Tube Shock Convesion Kit for the Front of a MGB. Finally a great upgrade for your MGB. The kit comes with everthing you will need to put adjustable tube shocks on the front of your MGB. GAZ struts has a Zinc plated body that resists salt spray and road grime and looks great. Every unit is fully tested when dispatched from the factory with an individual dynamometer report to insure quality. With this shock you get a 30 point rotary adjustments providing the facility for fine tuning without the need to remove the shock absorber from the car. $524.95 GCK - 001
MGB rear tube shock conversion - This is a Tube Shock Conversion Kit for the rear of a MGB. Finally a great upgrade for your MGB. The kit comes with everything you will need to put adjustable tube shocks on the Rear of your MGB. GAZ struts has a Zinc plated body that resists salt spray and road grime and looks great. Every unit is fully tested when dispatched from the factory with an individual dynamometer report to insure quality. With this shock you get a 30 point rotary adjustments providing the facility for fine tuning without the need to remove the shock absorber from the car. $288.95 #GCK - 002
Rebuilt heavy duty lever shocks $89.95 exchange(front or rear) #RHDLSMGA/B
Rebuilt lever shocks $79.95 each exchange (front or rear) #LSMGA/B
Spax rear tube shock conversion kit (specify year) $260 #CK1314
Front springs - uprated (chrome bumper roadster) $49.95/pr #AHT21
Front springs (Stock MGB/GT) $59.95/pr #BHH1077
Front springs (Stock rubber bumper roadster) $59.95/pr #BHH1225
Rear springs (uprated) $75/ea #AHH7346
V8 front A-arm bushings $12/set #BHH1123

Urethane bushings:

Front A-arm $32/set #MG-1
Front upright top bushing $14/set #MG-2
Rear spring front bushing $16/set #MG-3
Rear shackle bushing $14/set  #MG-4
Rear spring pad $24/set #MG-5
Sway bar (specify bar diameter) $8/set  #AH-1a
Valve cover grommets $1.25/ea #M-6
Complete urethane suspension kit - includes all above urethane bushings $99.95  #MGA/B-CUK 
Nylatron or delrin (not recommended for street use) CFP

ENGINE

Description Price Part #
Cams - see cam spec sheet
Dual valve springs  $74.95 #MG05/06
Dual valve spring retainers (use with above springs) $30.95 #MG07
Roller rockers (uses bronze shaft bushing - no hardened shaft needed) $240/set #MGA/BRR
Tufftrided (hardened) rocker shaft $59.95 11G62HRS
Aluminum flywheel $335.00 ALFLYMGB  (specify year)
Header (all headers are mild steel - coating is available - CFP) - also available for Weber conversion - CFP $199 street $275 race  #2014 (street) - state year of car; #1083 (race)
Intake manifold for 1 3/4" SU's $185 (CFP due to dollar fluctuation) #AJJ3374
1 3/4" SU carbs (used only - not rebuilt) $140 - 200/pr
Chromoly pushrods - Other lengths available. $69.95/set #AEH767
Pistons $165 - 190/set depends on wrist pin & bore size
Forged pistons - not recommended for street use CFP
Alloy valve cover w/cap & fitting kit
Alloy valve cover with out cap & fitting kit
$94.95
$74.95
#AVCMGA/B
#AVCMGA/B-NK
Gear reduction starter - very small size; 9.5 lbs; see starter spec sheet $200.00 #TSIMI1206-9A (MGA/B to "67) - #TSIMI1206-10A (MGB -"68 - "80)
Solid center clutch disc - available w/organic or metallic lining. (not recommended for street use) $104.95 #SCCDMGA/B
Competition Preparation Manual (no MGA available) $4.95 #CPM-MGB
V8 Conversion parts - see MGBV8 conversion spec sheet

OTHER

Description Price Part #
Steelbraid hose - oil, water, fuel (Sold by the foot) CFP
Oil coolers $89.95 (13 row) #GOC13 - other sizes/configurations available - CFP
Mesh headlamp stone shield - chrome or black  $9.95 7" stone shield
Roll bars - MGA or MGB & MGB/GT.  NOTE - our street bar and race bar are made from the same material. The street bar is shorter to clear the top and does not have the diagonal brace required for racing street - $265; race - $475; roll cage - CFP  MGB - #2035(street); #3035 (race):  MGA - #2008 (street); #3008 (race)
Roll bar padding - colors available $4.50 per 3' tube
Race car ONLY windscreen $150 #RCWSMGB
Alternate differential ratios CFP & availability
Race car ONLY body panels CFP
Battery disconnect switch (with removeable key) - Great for anti-theft. Required in all race applications. $12.95  #BKS1
MechanixWear gloves - Sizes XS - XL - Helps the professional mechanic and enthusiast work with confidence. Protects hands from heat and cold while retaining manual dexterity with increased finger grip control. Worn by pit crews from Daytona to the Saturday night dirt tracks. Available in red, yellow, blue and black. $14.95 #MWG

CFP = Call For Price
 
To order call toll free - (800) 543-6648 (USA and Canada)

To order by fax - (419) 384-3272 (24 hours)

For technical support - (419) 384-3022

TS Imported Automotive, 108 South Jefferson St., Pandora, Ohio, 45877, USA
Tel 800.543.6648 (USA & Canada only) 419.384.3022 (Tech / General Information)
Fax 419.384.3272 (24 hours) tedtsimx@bright.net
Hours 8:30 - 5 p.m. Monday - Friday, 9 - 1 p.m. Saturday (unless attending an event)

| Home | About | Catalog | Services | Cars & Parts Cars | Gear Head Gifts | Product Info | Links | Contact Us |

Triumph TriumphRoverMG Austin-Healey

© Copyright 2010, TesRac Enterprises Inc. All Rights Reserved.      Web Design by Revolutionary Design Solutions